USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model D10AAXXZ4
Features:
"   RoHS Compliant
"   10 Watts
"   Low Cost
"   DC 3.0GHz
"   Alumina Ceramic
"   Non-Nichrome Resistive
Element
"   Low VSWR
"   100% Tested
Surface Mount Attenuator
10 Watts
The D10AAXXZ4 is high performance Alumina (Al
2
O
3
) surface mount
attenuator intended as a lower cost alternative to Aluminum Nitride (AlN)
and Beryllium Oxide (BeO). The attenuator is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The
high power handling makes the part ideal for inter-stage matching,
directional couplers, and for use in isolators.
General Specifications
Resistive Element
Thick film
Substrate
Alumina Ceramic
Terminal Finish
Matte Tin over Sulfamate Nickel
Operating Temperature
-55 to +125癈 (see de rating chart)
Tolerance is 0.010, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value:
1 7, 9, 10, 20 & 30dB
Power:
10 Watts
Frequency Range:
DC 3.0GHz
VSWR
<1.25:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
THE D10AAxxZ4 SERIES OF ATTENUATORS ARE SYMMETRICAL
UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES